Skip to main content

Traefik

Overview​

In this guide we will be using Traefik as a reverse proxy to access the Remnawave panel. We will point a domain name to our server and configure Traefik. Traefik will handle the issuance of SSL certificates by itself.

warning

You need to have a registered domain name to continue.

Point domain to your server​

Check your server's IP address. It is better to use a static IPv4 address.

Now, you need to point your domain name to this IP address.

For example, it will be my-super-panel.com -> 193.122.122.122.

There are two ways to do this:

  1. Use a DNS provider (e.g. Cloudflare, Google Cloud, etc.)
  2. Use a registrar (e.g. Namecheap, etc.)

DNS provider​

If you are using Cloudflare, you need to add a A/AAAA record (for IPv4 and IPv6 respectively) to your DNS records.

Log in to your Cloudflare account here and select the desired domain.

On the left side of the page, click on DNS and then click on Records. Click on Create record.
Set the Type to A and the Name to @.

info

If you want to use subdomains, you should enter the subdomain name (e.g. panel) in the Name field.

Enter your server's IP address in the IPv4 address field. and click on Save.

Now you need to wait a while for the DNS records to be updated.

info

There is a big difference between yellow cloud (domain is proxied by Cloudflare) and grey cloud (domain is not proxied by Cloudflare) in the Cloudflare control panel.

If Cloudflare works fine in your region, it is better to proxy the domain through Cloudflare. (Yellow cloud)

static

Some DNS providers have a different interface, but the overall process is the same.

Traefik configuration​

Create docker-compose.yml​

Create a docker-compose.yml file in the /opt/remnawave/traefik directory.

mkdir -p /opt/remnawave/traefik && cd /opt/remnawave/traefik && nano docker-compose.yml

Paste the following configuration.

docker-compose.yml
services:
    traefik:
        image: traefik:latest
        container_name: traefik
        restart: unless-stopped
        security_opt:
            - no-new-privileges:true
        networks:
            - remnawave-network
        ports:
            - '0.0.0.0:80:80'
            - '0.0.0.0:443:443'
        environment:
            - TZ=UTC
        volumes:
            - /var/run/docker.sock:/var/run/docker.sock:ro
            - ./traefik.yml:/traefik.yml:ro
            - ./letsencrypt:/letsencrypt
            - ./config:/config:ro
            - ./logs:/var/log/traefik
networks:
    remnawave-network:
        name: remnawave-network
        driver: bridge
        external: true

Create static configuration file​

Creating a static configuration file called traefik.yml in the /opt/remnawave/traefik directory.

cd /opt/remnawave/traefik && nano traefik.yml

Paste the following configuration.

warning

Please replace REPLACE_WITH_YOUR_EMAIL with your email.

Review the configuration below, look for yellow highlighted lines.

traefik.yml
api:
  dashboard: true
  debug: true
entryPoints:
  http:
    address: ":80"
    http:
      redirections:
        entryPoint:
          to: https
          scheme: https
  https:
    address: ":443"
serversTransport:
  insecureSkipVerify: true
providers:
  file:
    directory: /config
    watch: true
certificatesResolvers:
  letsencrypt:
    acme:
      email: REPLACE_WITH_YOUR_EMAIL
      storage: /letsencrypt/acme.json
      httpChallenge:
        entryPoint: http

log:
  level: "INFO"
  filePath: "/var/log/traefik/traefik.log"
accessLog:
  filePath: "/var/log/traefik/access.log"

Create dynamic configuration file​

Create a file called remnawave.yml in the /opt/remnawave/traefik/config directory.

mkdir -p /opt/remnawave/traefik/config && cd /opt/remnawave/traefik/config && nano remnawave.yml

Paste the following configuration.

warning

Please replace REPLACE_WITH_YOUR_DOMAIN with your domain name.

Review the configuration below, look for yellow highlighted lines.

remnawave.yml
http:
  routers:
    remnawave:
      rule: "Host(`REPLACE_WITH_YOUR_DOMAIN`)"
      entrypoints:
        - https
      middlewares:
        - remnawave-https-redirect
      tls:
        certResolver: letsencrypt
      service: remnawave

  middlewares:
    remnawave-https-redirect:
      redirectScheme:
        scheme: https

  services:
    remnawave:
      loadBalancer:
        servers:
          - url: "http://remnawave:3000"

Start the container​

docker compose up -d && docker compose logs -f -t

Restricting access to the panel by IP​

If you want to restrict access to the panel by IP, you can create a middleware file named ip_allow_list.yml

cd /opt/remnawave/traefik/config && nano ip_allow_list.yml

Paste the following configuration.

warning

Please replace REPLACE_WITH_YOUR_IP with your allowed IP address (or ranges of allowed IPs by using CIDR notation).

Review the configuration below, look for yellow highlighted lines.

info

If your domain name is proxied by Cloudflare, then you need to specify the IP ranges belonging to Cloudflare in the excludedIPs list.

Cloudflare regularly updates its IP ranges so it's a good practice to use the official Cloudflare page to make sure that you have an up-to-date list.

ip_allow_list.yml
http:
    middlewares:
        ip-allow-list:
            ipAllowList:
                sourceRange:
                    - "REPLACE_WITH_YOUR_IP"
                ipStrategy:
                    excludedIPs:
                        - 73.245.48.0/20
                        - 103.21.244.0/22
                        - 103.22.200.0/22
                        - 103.31.4.0/22
                        - 141.101.64.0/18
                        - 108.162.192.0/18
                        - 190.93.240.0/20
                        - 188.114.96.0/20
                        - 197.234.240.0/22
                        - 198.41.128.0/17
                        - 162.158.0.0/15
                        - 104.16.0.0/13
                        - 104.24.0.0/14
                        - 172.64.0.0/13
                        - 131.0.72.0/22

Then you need to add the middleware ip-allow-list to the remnawave.yml configuration file.

nano remnawave.yml

Pay attention to the green line which is the one you need to add.

remnawave.yml
http:
    routers:
        remnawave:
            rule: 'Host(`REPLACE_WITH_YOUR_DOMAIN`)'
            entrypoints:
                - https
            middlewares:
                - remnawave-https-redirect
                - ip-allow-list
            tls:
                certResolver: letsencrypt
            service: remnawave

    middlewares:
        remnawave-https-redirect:
            redirectScheme:
                scheme: https

    services:
        remnawave:
            loadBalancer:
                servers:
                    - url: 'http://remnawave:3000'

Allowing public access to the subscription path​

For the subscription system to work correctly, the /api/sub/ path must be publicly accessible.
At the same time, the rest of the panel should remain protected by IP-based restrictions.

To achieve this, you need to define two separate routers for the same domain β€” one for /api/sub/ (open access), and one for everything else (restricted).

Open the file remnawave.yml again:

nano /opt/remnawave/traefik/config/remnawave.yml

And update the router configuration as follows:

remnawave.yml
http:
  routers:
    remnawave-sub:
      rule: "Host(`REPLACE_WITH_YOUR_DOMAIN`) && PathPrefix(`/api/sub/`)"
      middlewares:
        - remnawave-https-redirect
      entrypoints:
        - https
      service: remnawave
      tls:
        certResolver: letsencrypt

    remnawave-secure:
      rule: "Host(`REPLACE_WITH_YOUR_DOMAIN`)"
      entrypoints:
        - https
      middlewares:
        - remnawave-https-redirect
        - ip-allow-list
      service: remnawave
      tls:
        certResolver: letsencrypt

  middlewares:
    remnawave-https-redirect:
      redirectScheme:
        scheme: https

  services:
    remnawave:
      loadBalancer:
        servers:
          - url: "http://remnawave:3000"

This configuration makes the /api/sub/ path publicly accessible, while the rest of the panel remains IP-restricted.

Open the panel in the browser​

Open the configured domain name in the browser and you will see the login page.

login-page

Troubleshooting​